- Phone:+86 13705555767
- Tel:+86 0555-6797579
- Q Q:2159779366
- E-mail:amd@amdmt.com
- Address:Bowang Development Zone, Ma'anshan City, Anhui Province
Performance characteristics:
This machine is applicable to the pressing process of plastic materials, such as blanking, bending, flanging, sheet drawing, etc. It can also be used in correction, press mounting, grinding wheel forming, cold extrusion metal parts forming, plastic products and powder products forming.
The machine has an independent power mechanism and electrical system, and adopts centralized button control, which can realize three operation modes of adjustment, manual and semi-automatic.
The working pressure, pressing speed and stroke range of the machine can be adjusted according to the process requirements. It can also complete two process modes of constant pressure and fixed range forming. The process mode of constant pressure forming has pressure maintaining and automatic return action after pressing.
Yq32 four column hydraulic press has the functions of ejection, delay and automatic return in addition to the above functions.
Low power consumption, high sealing performance, lower production cost.
Parameter table of Y32 series four column hydraulic press:
参数名称 | 单位 | 四 柱 液 压 机 | |||||||||||||||||
40 | 63 | 100 | 100B | 100C | 160A | 160B | 200 | 315 | 400 | 500 | 500C | 630 | 800 | 1000 | 1250 | 1600 | |||
公称力 | KN | 400 | 630 | 1000 | 1000 | 1000 | 1600 | 1600 | 2000 | 3150 | 4000 | 5000 | 5000 | 6300 | 8000 | 10000 | 12500 | 16000 | |
顶出力 | KN | 120 | 1902 | 190 | 190 | 190 | 400 | 400 | 400 | 630 | 630 | 1000 | 1000 | 1000 | 1600 | 2000 | 2000 | 2000 | |
液体最大工作压力 | mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |
滑块行程 | mm | 450 | 500 | 600 | 600 | 600 | 700 | 700 | 700 | 800 | 800 | 900 | 900 | 900 | 900 | 900 | 900 | 900 | |
顶出行程 | mm | 150 | 200 | 200 | 200 | 200 | 200 | 200 | 250 | 300 | 300 | 350 | 350 | 350 | 450 | 450 | 450 | 450 | |
滑块下平面至工作台面最大距离 | mm | 700 | 800 | 900 | 900 | 900 | 1000 | 1000 | 1100 | 1250 | 1300 | 1500 | 1500 | 1500 | 1500 | 1600 | 1600 | 1600 | |
滑块行 程速度 | 空程下行 | mm/s | 80 | 220 | 22 | 120 | 220 | 100 | 100 | 100 | 100 | 120 | 100 | 100 | 80 | 80 | 80 | 80 | 80 |
工 作 | mm/s | 25 | 16 | 14 | 14 | 14 | 12 | 12 | 8 | 6-8 | 5-7 | 5 | 5 | 10 | 8 | 10 | 6-10 | 6-10 | |
回 程 | mm/s | 80 | 150 | 120 | 120 | 120 | 60 | 60 | 52 | 60 | 45 | 60 | 60 | 60 | 50 | 50 | 45 | 40 | |
工作台 尺寸 | 左 右 | mm | 500 | 580 | 720 | 720 | 720 | 680 | 1000 | 1000 | 1260 | 1240 | 1400 | 2450 | 1500 | 1500 | 1530 | 1700 | 2000 |
前 后 | mm | 460 | 500 | 580 | 580 | 58/0 | 620 | 800 | 900 | 1200 | 1200 | 1400 | 1480 | 1500 | 1400 | 1600 | 1600 | 1600 | |
机器外 形尺寸 | 左 右 | mm | 2000 | 2400 | 2500 | 2500 | 2500 | 2700 | 2800 | 3100 | 3235 | 3235 | 4060 | 6500 | 4200 | 4800 | 5250 | 5250 | 5800 |
前 后 | mm | 1300 | 1400 | 1500 | 1500 | 1500 | 1700 | 1700 | 1800 | 2060 | 2200 | 3535 | 3800 | 4200 | 4000 | 3800 | 3800 | 4000 | |
地面上高度 | mm | 2600 | 3100 | 2950 | 2950 | 3150 | 3400 | 3400 | 3500 | 4295 | 4500 | 4995 | 4740 | 5600 | 6000 | 5800 | 6000 | 6200 | |
电机总功率 | KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 11 | 11 | 15 | 22 | 22 | 44 | 44 | 44 | 60 | 75.5 | 75.5 | 75.5 | |
机器重量 | Kg | 1500 | 3800 | 4000 | 4000 | 4000 | 5000 | 6200 | 14000 | 14000 | 17500 | 28000 | 38000 | 38000 | 41000 | 48000 | 60000 | 82000 |
Note: If the parameters in this table are inconsistent with the machine tool data, the actual data of the machine tool shall prevail. The Company reserves the right of final interpretation.